|
| | Foxconn
975X7AA-8EKRS2 Review Intro 4/5
Bluetooth 5 May 2006
|
Pricing
from
various
vendors
>>> |
|
BIOS I
 |
 |
Smart Power LED, Boot Menu and Smooth O/C can be enabled/Disabled.
Multiplier can be changed if you are using a ES CPU. There is also the Fox
Intelligent Stepping which allows you to set the various modes (see diagram
on the right)
|
FOX Intelligent Stepping allows the system to auto overclock the system
based on the load. Using the SUPERPI and running the thg clk utility, i can
see that the base clk flutuates between 200 - 225MHz depending on the kind
of setting used. Some of the settings available are AUTO, MANUAL, Power
Gaming, Data Mining, Office, Energy Saving. For the more aggressive modes,
it is advisable to reduce the ram timings to ensure stability. |
 |
 |
|
As usual, this is where you can set up the RAM timings, Latency, Memclk etc.
e.g. CAS Latency, tras, trp, trcd. |
Base CLK can be set from 200 to 600MHz. The window is a bit overkill.
200~450 should be good enough. |
Discuss in Forum
Next >>>
| |
|
