|
CPU Voltage can be set accordingly. Take note that it depends on the CPU. In
our case, a 4000+, it is already default at 1.400v and we can't select
anything beyond that. |
CAS Latency, tRAS, tRCD, tRP, 1t Cmd timing etc, all can be adjusted
accordingly. In our case, we ran the DDR2 module at CAS 5, 10-5-5 1T 8 beats
DDR2-800. So far, we haven't seen any low latency DDR2-800 modules. Most are
CAS 5. |
