Advanced Chipset Features
allows you to tune the ram timings. CAS latency, RAS to CAS, RAS Precharge,
Precharge Delay etc. We set it to CAS 2, 5-2-2. In fact it is
automatically set to so because we used 2 x 512M of Corsair TWINX
CMX512-3200XL
In the PowerBIOS you can set
the CPU Clock/Speed, CPU clock ratio, system memory freq (1:1, 6:5). CPU
Vcore ad Vdimm Voltage.
FSB is
selectable up to 350MHz FSB
This board supports dynamic
overclocking up to 226MHz. If you enable this mode, make sure the ram
timings are not set too tight.
